How To Turn Down Keyboard Brightness

Share This:

If you’re looking to turn down the brightness of your keyboard, you’ve come to the right place! Adjusting the brightness of your keyboard can be done in a few different ways, depending on your operating system and computer type. In this blog post, we’ll explain exactly how to adjust the brightness of your keyboard with easy-to-follow instructions.

On Macs

If you’re using a Mac, there are a few ways to adjust the brightness of your keyboard. The simplest way is to press and hold the “Fn” key and then press the “Spacebar” key. This will toggle through three levels of brightness: off, medium, and high. If you want a more granular level of control over your keyboard lighting, you can do so by going into System Preferences > Keyboard > Adjust Keyboard Brightness in Low Light. Here, you can select from one of four levels of brightness: low, medium-low, medium-high, and high.

On Windows PCs

Windows PCs have a slightly different approach to adjusting keyboard lighting settings. To start off with adjusting the settings for your backlit keyboard if it has one installed), open up the Windows Mobility Center by pressing the “Win+X” keys together on your keyboard or searching for it in Start Menu. Once you are inside Mobility Center Window locate the Keyboard Backlight tab and move the slider towards the right side to enable it if it is disabled already. If enabled already then move it towards the left or right side to increase or decrease its level respectively.

Once done save changes by clicking the OK button or apply button given at the bottom right corner and close the Mobility Center window as well as other opened windows if any are present there. Now when you use a laptop in a dark environment or with dimmed light then this backlight will help you type easily without turning on other lights around you all time which results in better energy usage as well as an eye saver for sure!

Some laptops like the HP Elitebook series laptop come with a dedicated hotkey (a combination of keys) with which users can directly control their backlit keyboards without going through the above lengthy process which simply means that just pressing a dedicated hotkey (like F5 + Fn keys together) will enable/disable backlit feature present on HP EliteBook series laptops instantly without going through any other steps listed above process wise!

No matter whichever method you follow above-mentioned methods must work fine for sure but still if someone faces any difficulty while doing so then kindly contact respective technical support team members who will definitely help them out in resolving their issue wisely!

Adjusting Keyboard Brightness

You can adjust the brightness of your keyboard by using the Fn + Space hotkey. Pressing this key combination once will turn on the backlit keyboard with medium brightness, and pressing it again will increase the brightness to high. You can also adjust the brightness manually in your system settings. To do this, open your Control Panel, select ‘Hardware and Sound’, then ‘Keyboard’ and you should be able to find a setting to adjust the backlit keyboard brightness.

how to turn down keyboard brightness

Dimming the Keyboard Light on a Macbook Air

To dim the keyboard light on your MacBook Air, first, open the System Settings window by selecting the Apple menu and then selecting System Settings. Once the System Settings window opens, select Keyboard from the sidebar. You may need to scroll down to find it. On the right side of the window, you will see an option for Adjust Keyboard Brightness in Low Light; turn this setting on. This will enable your MacBook Air to automatically adjust your keyboard brightness when it is in a low-light environment.

Changing Keyboard Brightness on Windows 10

To change the brightness on your keyboard in Windows 10, open the Windows Mobility Center. Move the slider under the Keyboard backlight tab to the right to enable the backlight. Then click on the tab to access additional options. Here you can enable Keyboard lighting and select the brightness you want. You can also adjust other settings such as power, display, audio, network, and presentation modes.

Turning On the Keyboard Light

Depending on the type of keyboard you have, there are a few different ways to turn on your keyboard light.

For some keyboards, you can simply press an “Fn” key (usually located near the bottom left corner of your keyboard) in combination with one of the “F” keys (F5, F9, or F11) at the top row of your keyboard. This combination should toggle the light on and off.

For other keyboards, you may need to press and hold down the “Fn” key while pressing one of those same “F” keys (F5, F9, or F11). Once again, this should toggle the light on and off.

Finally, some keyboards have a dedicated button for turning the backlight on or off. If your keyboard has one of these buttons, it’s typically located near the top right corner of your keyboard.

If all else fails, you may want to refer to your keyboard’s manual for more specific instructions about how to turn on its light.

Decreasing Brightness with the F Keys

The F key that turns brightness down is Fn + F5. To decrease lighting intensity, press the Fn+F5 keys.

how to turn down keyboard brightness

Adjusting Keyboard Brightness on Mac Computers

If you’re unable to adjust your keyboard brightness on your Mac, it may be because the feature is not enabled. To enable the Keyboard Brightness setting, go to System Preferences > Keyboard > Keyboard tab > and check the box next to “Adjust keyboard brightness in low light”. If this setting is already checked and you still can’t change your keyboard brightness, make sure that your device is running the latest version of macOS and that all of your software is up-to-date. If that doesn’t work, try resetting the SMC or NVRAM/PRAM on your device.

Locking Keyboard Brightness on Mac Computers

On Mac computers, the brightness of your keyboard is automatically adjusted based on how much light is in the room. This is a power-saving feature, as it prevents your keyboard from glowing too brightly and wasting energy when it’s not needed. When the brightness is locked, your computer will use the same brightness level regardless of how much light there is in the room. This helps to maximize battery life and ensures that the keys are always visible enough for typing.

Troubleshooting Keyboard Brightness Adjustment in Windows 10

If your keyboard shortcuts for adjusting the brightness in Windows 10 are not working, there are a few other methods you can try.

First, you can use the Windows Action Center to adjust your brightness. To do so, open the Action Center by clicking on the Notifications icon in the bottom right of your taskbar. Click on Expand to view all of your notifications and settings. You should see a Brightness slider under the Quick Actions section that you can use to adjust your screen brightness.

Second, you can also adjust your brightness through the Settings application. To do this, open Settings and select System from the list of apps. Select Display from the left-hand menu and then move the Brightness slider at the bottom of the page to make adjustments.

Lastly, if you have a laptop or tablet with a physical brightness button or switch (usually located near the power button), you can use this to manually adjust your screen’s brightness level.

If none of these methods work, it may be that there is an issue with your hardware or drivers that need to be resolved. We recommend contacting your hardware manufacturer for further assistance with this issue.

Lowering the Keyboard Light on Windows

To lower the keyboard light on Windows, you can press and hold the Fn key and then press the F5 key. This will decrease the keyboard backlighting to a lower level. You can also press and hold the Fn key and then press the F6 key to increase the backlighting of the keyboard.

Does My Laptop Have Keyboard Lighting?

If your laptop has an F10, F6, or right arrow key (located in the lower right-hand corner) with an illumination icon printed on it, then your laptop is equipped with a backlit keyboard. If none of these keys have the illumination icon printed on it, then unfortunately your laptop does not have a backlit keyboard.

how to turn down keyboard brightness

Unable to Turn On the Keyboard Light

It’s possible that the keyboard backlight option is not enabled in your computer’s BIOS. To enable it, power off the computer and then press the power button, and immediately start pressing the F2 key once per second. If you’re able to access the BIOS, look for a setting related to keyboard backlighting and make sure it’s enabled. If this doesn’t work, it could be a hardware issue and you may need to contact your computer manufacturer for assistance.


In conclusion, keyboard brightness is an important feature for anyone who needs to type in low-light conditions. It can be adjusted either through the system settings on Macs or through the Windows Mobility Center on Windows systems. The brightness can generally be adjusted by pressing a specific key combination, such as Fn + Spacebar, or by using a slider bar in the settings menu. Adjusting the keyboard brightness is an easy way to ensure that your typing experience is comfortable and efficient even in low-light environments.

Share This:
Photo of author

James Walker

James Walker has a deep passion for technology and is our in-house enthusiastic editor. He graduated from the School of Journalism and Mass Communication, and loves to test the latest gadgets and play with older software (something we’re still trying to figure out about himself). Hailing from Iowa, United States, James loves cats and is an avid hiker in his free time.