How to Turn Airplay Back On Vizio TV?

Share This:

Vizio TVs are known for their advanced features and user-friendly interface. One popular feature is AirPlay, which allows you to stream content from your Apple devices directly to your Vizio TV. However, sometimes AirPlay may not work as expected, and you may need to turn it back on. In this article, we will guide you through the steps to turn AirPlay back on your Vizio TV.

Before we begin, make sure that your Vizio TV and your Apple devices are turned on and connected to the same Wi-Fi network. This is crucial for AirPlay to work properly. Also, ensure that both your TV and Apple devices are updated to the latest software version. Outdated software can sometimes cause compatibility issues.

To start, grab your Apple device and open the Control Center by swiping down from the top-right corner (on iPhone X and later) or swiping up from the bottom (on older iPhones and iPads). On iPads with the latest software, you can access the Control Center by swiping down from the top-right corner. In the Control Center, you should see the AirPlay icon, which looks like a rectangle with a triangle at the bottom.

Tap on the AirPlay icon to bring up the AirPlay options. Here, you should see a list of available AirPlay devices, including your Vizio TV. If you don’t see your TV listed, make sure it is turned on and connected to the same Wi-Fi network as your Apple device. You can also try restarting both your TV and Apple device to refresh the connection.

Once you see your Vizio TV in the AirPlay options, tap on it to connect. You may be prompted to enter a code displayed on your TV screen to confirm the connection. Follow the on-screen instructions to complete the pairing process.

After successfully connecting to your Vizio TV, you can now start streaming content from your Apple device. Open any AirPlay-compatible app, such as YouTube or Netflix, and look for the AirPlay icon within the app. It usually appears as a rectangular outline with an arrow pointing towards a TV screen.

Tap on the AirPlay icon within the app and select your Vizio TV from the list of available devices. The content should now start playing on your TV screen. You can control the playback using your Apple device or the TV remote.

If AirPlay still doesn’t work after following these steps, try casting a different app to your Vizio TV. If another app successfully casts, it indicates that the issue may be specific to the app you were initially trying to use. In that case, it is recommended to contact the app developer for further assistance.

Turning AirPlay back on your Vizio TV is a straightforward process. By ensuring that your devices are updated and connected to the same Wi-Fi network, you can easily stream content from your Apple devices to your Vizio TV. If you encounter any issues, try restarting your devices or contacting the app developer for additional troubleshooting. Happy streaming!

How to Turn Airplay Back On Vizio TV? 1

Why is Your TV Not Showing Up on AirPlay Anymore?

There can be several reasons why your TV is not showing up on AirPlay anymore. Here are some possible causes and troubleshooting steps you can try:

1. Check device compatibility: Ensure that your TV is AirPlay-compatible. Not all TVs support AirPlay, so verify that your TV model is capable of receiving AirPlay signals.

2. Verify network connectivity: Make sure that both your TV and the device you are using to AirPlay are connected to the same Wi-Fi network. If they are on different networks, they won’t be able to communicate with each other.

3. Update software: Ensure that both your TV and the device you are using for AirPlay have the latest software updates installed. Outdated software can cause compatibility issues and prevent AirPlay from working correctly.

4. Restart devices: Try restarting both your TV and the device you are using for AirPlay. Sometimes, a simple restart can resolve temporary glitches and connectivity issues.

5. Reset network settings: On your TV, go to the network settings and reset them. This will clear any saved network configurations that might be causing issues with AirPlay.

6. Check firewall settings: If you have a firewall enabled on your Wi-Fi network, make sure it is not blocking AirPlay connections. Adjust the firewall settings to allow AirPlay communication.

7. Disable VPN or proxy: If you are using a VPN or proxy service on your device, try disabling it temporarily. These services can interfere with AirPlay functionality.

8. Check for interference: Other wireless devices or electronics near your TV could be causing interference with the AirPlay signal. Move any potential sources of interference away from the TV.

9. Factory reset: If none of the above steps work, you can try performing a factory reset on your TV. This will revert all settings back to their original state. However, note that this will erase all personalized settings and data on your TV, so proceed with caution.

10. Contact manufacturer support: If the issue persists, it may be best to reach out to the manufacturer’s support team for further assistance. They may be able to provide specific troubleshooting steps based on your TV model.

Remember, these steps are general troubleshooting suggestions, and the exact steps may vary depending on your TV model and the device you are using for AirPlay.

Why Can’t You Cast on Your Vizio TV?

There could be several reasons why you are unable to cast on your Vizio TV. Here are some possible explanations:

1. App compatibility: Not all apps are designed to support casting to smart TVs. Make sure that the app you are trying to cast from is compatible with your Vizio TV. Check the app’s documentation or contact the app developer for more information.

2. Network connectivity: Casting requires a stable and reliable wireless network connection. Ensure that your Vizio TV is connected to the same Wi-Fi network as your casting device. If the network connection is weak or unstable, it may prevent casting from working properly. Restarting your router or moving closer to the router can help improve the network connection.

3. Firmware updates: Outdated firmware on your Vizio TV can sometimes cause casting issues. Check for any available firmware updates for your TV model and install them if necessary. This can often resolve compatibility issues and improve casting functionality.

4. Casting device settings: Ensure that the casting feature is enabled on your Vizio TV. Open the settings menu on your TV and look for the casting or mirroring options. Make sure they are turned on. Additionally, check the settings on your casting device to ensure that casting is enabled.

5. Restart devices: Sometimes, simply restarting both your Vizio TV and casting device can resolve casting issues. Turn off both devices, wait for a few minutes, and then turn them back on. This can help refresh the connection between the devices and resolve any temporary glitches.

If none of the above solutions work, it is recommended to contact Vizio support or refer to the user manual for further troubleshooting steps.


Vizio TV offers a wide range of features and functionalities, including the ability to use AirPlay and screen mirroring. To ensure a successful connection, it is important to make sure that all devices involved are turned on, updated to the latest software, and connected to the same Wi-Fi network. Restarting the devices can also help resolve any connectivity issues.

If you are experiencing difficulties with a specific app not casting, try casting a different application to check if the issue lies with the app itself. If another app is successfully casting, it indicates that the SmartCast Display, wireless network, and control device are working fine.

If the problem persists, it is recommended to reach out to the app developer for further assistance and troubleshooting. They will be able to provide more specific guidance and help resolve any compatibility issues.

Vizio TV offers a seamless AirPlay and screen mirroring experience, and by following the mentioned steps, you should be able to enjoy casting content from your devices to your Vizio TV effortlessly.

Share This:
Photo of author

Sanjeev Singh

Sanjeev is the tech editor at DeviceMAG. He has a keen interest in all things technology, and loves to write about the latest developments in the industry. He has a passion for quality-focused journalism and believes in using technology to make people's lives better. He has worked in the tech industry for over 15 years, and has written for some of the biggest tech blogs in the world. Sanjeev is also an avid photographer and loves spending time with his family.