How To Continue If Iphone Data Transfer Is Interrupted

Share This:

Moving your data from an old iPhone to a new one can be a daunting task, especially if you’ve encountered an interruption during the process. Fortunately, there are ways to troubleshoot the issue and continue the transfer so that you can get your new iPhone up and running in no time.

The first step when dealing with a transfer interruption is to check your internet connection status. If you’re using Wi-Fi then you should make sure that it is stable and that there isn’t any congestion on the network. If the connection is stable then you can move on to other solutions.

The next step is to enable Airplane Mode on both phones. This will turn off all wireless connections so that your phones won’t be distracted by incoming calls or messages while transferring data. Once Airplane Mode is enabled, try restarting the phones and start the transfer again.

Another solution is to turn off your smart network switch on both phones. This will prevent any interference with the transfer process as well as reduce battery usage on both devices. After disabling this feature, try restarting both phones and starting the transfer again.

It’s also important to ensure that no apps are running in the background while transferring data. To do this, double-click on your home button or swipe up from the bottom of your phone’s screen and close any apps that are open in order to free up resources for the data transfer process.

Finally, if all else fails, try restarting both phones before attempting to start the transfer process again. This should reset any settings that may have been corrupted during an interrupted transfer, allowing for a successful start-up of your new phone’s setup process.

By following these steps, you should be able to continue an interrupted iPhone data transfer without too much trouble. It may take some trial and error but eventually, you’ll be able to get everything up and running smoothly so that you can enjoy all of the features of your new device!

How To Continue If Iphone Data Transfer Is Interrupted 1

Interruptions During iPhone Data Transfer

If your iPhone data transfer is interrupted, the transfer will usually restart on its own. However, if it has not started again after being interrupted, then you may need to start the data transfer over again. To do this, you would need to erase your new iPhone by going to Settings > General > Reset > Erase All Content and Settings. Once you have done this, you can begin the data transfer process again.

Completing an Interrupted iPhone Transfer

To finish an interrupted iPhone transfer, you’ll need to start by checking your internet connection status. Make sure that your Wi-Fi or cellular data connection is working properly. Next, enable Airplane Mode on your device and turn off the Smart Network Switch feature. This will help to reduce any interference from other networks. After that, close any apps running in the background of your iPhone and restart it. Finally, open the Move to iOS app and try the transfer again. If you still experience issues, you can contact Apple Support for further assistance.

What To Do If an iPhone-to-iPhone Transfer is Interrupted

If you are attempting to transfer data from an iPhone to another iPhone and the transfer is interrupted, there are several possible solutions. Firstly, make sure that both phones have enough power and that they are connected to a stable Wi-Fi connection. If so, then restart both phones and try again. Additionally, you should also disable Smart Network Switch on the Android device if applicable. If the issue persists, try turning on Airplane mode on both devices or ensuring that no other applications are running in the background. Finally, if all else fails, you can attempt to use an alternative method such as a cloud service or iTunes backup file for data transfer.

Troubleshooting ‘Transfer Interrupted’ Error

Transfer interruptions occur when the network is not strong enough to support the transfer of data between Android and iOS devices. To ensure a smooth transfer, make sure you are connected to a fast and reliable WiFi network. If you are still experiencing transfer interruptions, try rebooting your router or switching to a different WiFi network. If none of these measures resolve the issue, contact your internet service provider for additional support.

Restarting an iPhone Transfer

Yes, you can restart the iPhone transfer. To do so, go to Settings > choose General > to select Transfer or Reset iPhone > tap Erase All Content and Settings > enter your passcode to confirm. This will erase all content and settings from the device and reset it to factory settings. After this process is complete, you can begin transferring data from your old device to your new one.

Troubleshooting an iPhone Stuck on Transferring Data

The most common reason why your old iPhone is stuck on transferring data is that your internet connection may be weak or there could be some other minor causes. This can cause your iPhone to take longer than usual to complete the data transfer and you may perceive it as a phone stuck transferring at 1-minute error. To avoid this, make sure that you have a strong and stable internet connection before starting the data transfer. If the issue persists, you may need to reboot both phones and try again.

Redoing an iPhone Transfer

Yes, you can redo your iPhone transfer. To do so, go to the Settings app on your new iPhone, then tap General and select Transfer or Reset iPhone. Next, choose to Erase All Content & Settings to reset the iPhone to factory settings (as it was when new). After that, you can use Quick Start to transfer data from your old iPhone to your new one.

Conclusion

In conclusion, transferring data from one iPhone to another can be a relatively straightforward process. The Move to iOS app is a great way to transfer data quickly and securely, but if the transfer is interrupted it can cause issues. To fix this, you should check your internet connection status, enable airplane mode, turn off your smart network switch, close any apps running in the background, and restart your phone. With these steps in mind, you should be able to successfully transfer all of your data from one iPhone to another with no problems.

Share This:
Photo of author

James Walker

James Walker has a deep passion for technology and is our in-house enthusiastic editor. He graduated from the School of Journalism and Mass Communication, and loves to test the latest gadgets and play with older software (something we’re still trying to figure out about himself). Hailing from Iowa, United States, James loves cats and is an avid hiker in his free time.