Troubleshooting AirPods Pro When They Aren’t Discoverable

Share This:

Are you having trouble getting your AirPods Pro (2nd generation) to show up as discoverable? If so, you’re not alone. Many users have run into this issue, and it can be quite frustrating.

The first thing to check is that your AirPods are charged. Even if the status light doesn’t flash white after opening the charging case lid, if your AirPods are charged they will be discoverable. If they’re not, plug them in and wait until they’re fully charged befoe continuing.

If you’ve verified that your AirPods are charged, but they still won’t show up as discoverable, try closing the lid of the charging case and then reopening it. This should reset the connection and make your AirPods apear in the list of available devices.

Another possible solution is to press and hold the setup button on the back of the charging case for a few seconds until you see the status light flash white. This should put your AirPods into pairing mode and make them available for discovery.

Finally, make sure that you have iOS 16 or later installed on your device if you are using an iPhone or iPad; macOS Ventura or later if you are using a Mac; or Windows 10 with support for Bluetooth 4.2 or higher if you are using a PC. Without these operating systems, Find My network won’t work with AirPods Pro (2nd generation).

Hopefully one of tese solutions has helped get your AirPods Pro (2nd generation) working properly again!

Making AirPods Pro Discoverable

To make your AirPods Pro discoverable, you need to put them in their charging case and open the lid. Then, press and hold the setup button on the back of the case untl the status light flashes white. Once the status light flashes white, your AirPods Pro will be discoverable to other Bluetooth devices. You can then select them from the list of available Bluetooth devices on your device.

airpods pro not discoverable
Source: walmart.com

Troubleshooting AirPods Pro Flashing White But Not Connecting

The answer to why your AirPods Pro are flashing white but not connecting could be due to a few different reasons. It could be that the device you’re tryng to connect to is out of range, or that something is blocking the connection. It could also be due to software issues, such as an outdated iOS version, or a corrupt Bluetooth driver. Lastly, it could be due to defective hardware, such as a faulty AirPod or Bluetooth chip. To troubleshoot this issue, please try restarting both devices and if that doesn’t work, try updating your iOS version and resetting your AirPods Pro.

Putting AirPods Into Discovery Mode

To put your AirPods into discovery mode, you will need to open the lid of the AirPods charging case and press and hold the setup button on the back of the case for approximately five seconds. You’ll know the AirPods are in discovery mode when you see a white flashing light. Once your AirPods are in discovery mode, you can use them with any compatible device that is near by.

airpods pro not discoverable
Source: cnbc.com

Troubleshooting Orange Blinking Airpod Pros That Won’t Connect

The orange light on your AirPods Pro indicates that the battery is low and neds charging. If you connect the AirPods to a power source, the orange light will turn off and your AirPods will be ready to use again. Make sure that your AirPods are in close proximity to your device when trying to connect them. If your AirPods still do not connect, you may need to reset them or check for any software updates.

Troubleshooting AirPods That Are Flashing But Not Connecting

If your AirPods are flashing and not connecting, it is likely that there is a problem with the connection beteen your AirPods and the device they are paired with. This could be caused by a number of issues including interference from other wireless devices, an issue with the Bluetooth settings on your device, or an issue with the firmware on your AirPods. To fix this issue, you should try to factory reset your AirPods and then re-pair them to your device. Factory resetting will clear any temporary issues that may have caused the connection to become unstable. If you are still having trouble after resetting, you may need to contact Apple Support for further assistance.

Troubleshooting Flashing White and Orange on Airpod Pros

The flashing white light on your AirPods Pro indicates that they are ready to pair with an iPhone or other devices via Bluetooth. Flashing orange or amber indicates an error in either performance or connectivity. This could be caused by a variety of issues such as low battery, a damaged component, or poor Bluetooth connection. If the issue persists, it’s best to contact Apple Support for more help with troubleshooting and resolving the issue.

Troubleshooting AirPods Connection and Reset Issues

If your AirPods are not connecting or resetting correctly, it could be due to a variety of reasons. The most common causes include:
1. The charging case may be damaged and no longer able to hold a charge properly.
2. The AirPods may still be connected to another device, preventing them from pairing with the new device.
3. Dirt on the charging case connectors or on the AirPods themselves can prevent the factory reset process from initiating correctly.
4. You may have purchased counterfeit AirPods that are not genuine Apple products and therefore unable to connect or reset properly.

To try and resolve these issues, make sure your AirPods are disconnected from any other devices they have been paired with previously and use a soft cloth to gently clean the charging case connectors as well as the AirPods before attempting to pair them again or reset them using Apple’s built-in reset feature in settings. If these steps do not resolve the issue, it is likely that either your charging case or AirPods need to be serviced or replaced by an authorized Apple service provider.

airpods pro not discoverable
Source: macrumors.com

Share This:
Photo of author

Sanjeev Singh

Sanjeev is the tech editor at DeviceMAG. He has a keen interest in all things technology, and loves to write about the latest developments in the industry. He has a passion for quality-focused journalism and believes in using technology to make people's lives better. He has worked in the tech industry for over 15 years, and has written for some of the biggest tech blogs in the world. Sanjeev is also an avid photographer and loves spending time with his family.