How to Muffled Sound on Your AirPods

Share This:

When it comes to listening to music or taking calls, havng clear audio is key. That’s why so many of us have invested in the Apple AirPods – they provide superior sound quality and convenience. Unfortunately, however, some users have been reporting muffled sounds coming from their AirPods.

One of the most common cuses of muffled AirPods is that they’ve become dirty. Whether it be earwax, dust, dirt, or anything else that’s found its way on the AirPods’ speakers, having a bunch of gunk clogging up the earpiece is a surefire way to get muffled audio. To fix this issue, you’ll want to apply rubbing alcohol to a cotton swab or pad and use it to clean the speaker mesh. If wax or dirt is in the mesh grid, you can carefully remove it with a small toothpick or dental hook.

If your AirPods Pro are producing muffled sound and cleaning doesn’t seem to do the trick, you may need to remove the silicone ear tips and check if tere is any debris stuck in them. If there is any debris present, clean it off with a damp cloth or cotton swab dipped in rubbing alcohol to ensure optimal performance.

If your problem persists even after cleaning your AirPods, then you may need to take them for repairs or replace them if they are still under warranty. Additionally, if your AirPods are more than two years old then their battery may be draining too quickly and causing poor sound quality; in this case you should look into getting them replaced as soon as possible.

In conclusion: If your AirPods are producing muffled sound then you should first try cleaning them with rubbing alcohol and/or removing any debris from the silicone ear tips (if applicable). If cleaning does not solve the issue then you can either take them for repairs or replace them depending on their age and warranty status.

Troubleshooting Muffled Sound on AirPods

The most likely cause of your AirPods sounding muffled is that they have become dirty. Earwax, dirt, dust and other debris can build up on the speakers of the AirPods over time, clogging them up and reducing their audio quality. To fix this issue, make sure to clean the AirPods regularly using a soft cloth or cotton swab dampened with water or isopropyl alcohol. Additionally, you may want to inspect the charging ports to ensure they are free from any debris.

airpods muffled sound

Fixing Muffled Hearing in AirPods

You can fix a muffled hearing issue with your AirPods by following these steps:
1. Apply rubbing alcohol to a cotton swab or pad.
2. If you have the Pro version, remove the silicone ear tips.
3. Use the cotton swab or pad to clean the speaker mesh.
4. If wax or dirt is in the mesh grid, carefully remove the item with a small toothpick or dental hook.
5. Rinse off any remaining rubbing alcohol and allow to air dry before placing back in your ears.
6. Test your AirPods by playing audio to ensure that sound is coming through cleary and without any distortion or muffled hearing issues.

Restoring AirPods Sound Quality

Restoring AirPods sound quality is relatively simple. First, make sure your AirPods are clean by wiping them down with a dry cloth. Afterwards, check the Music app’s sound settings and ensure that both ears of your AirPods are the same volume. Next, calibrate your AirPods with your iPhone to make sure they are functioning properly. Lastly, disable Low Power Mode if it is enabled – this can reduce sound quality. If you still feel like the sound quality is not up to par, consider resetting your AirPods by pressing and holding the setup button located at the back of the charging case for around 15 seconds untl the light in the case starts flashing white.

Does AirPods Audio Quality Decrease Over Time?

Yes, AirPods can lose sound over time due to dirt and ear wax buildup in the speaker mesh. As the mesh gets clogged up with dirt and ear wax, it can obstruct the audio signal coming out from the drivers, making the sound quieter. To prevent this from happening, it is important to regularly clean your AirPods usig a soft cloth or a cotton swab moistened with rubbing alcohol to ensure that the speaker mesh stays free of dirt and debris.

The Impact of Earwax on AirPods Performance

Yes, earwax can muffled AirPods, as it can build up on the microphone and speaker mesh of the device, blocking sound waves from getting through and causing sound to become distorted or muted. The best way to prevent this is to keep your AirPods clean by regularly wiping them with a dry cloth or using an anti-bacterial wipe. Additionally, if you notice that your AirPods are not performing as they should, you can use a cotton swab to gently remove any buildup of wax from the microphone and speaker mesh. Doing this regularly sould help keep your AirPods in good condition.

airpods muffled sound

Investigating the Causes of Muffled Sound on the Other End of AirPods

Your AirPods may sound muffled on the other end if the microphone settings are not set correctly. The microphone settings determine which side of the AirPods will be used for audio input. If the wrong side is selected, it can case audio to sound muffled or distorted. To check and change your microphone settings, open the Settings app and go to the Bluetooth section. Next to the AirPods entry on the list of devices, you should see an “i” icon inside of a circle. Tap this, then select microphone, and set it to either left, right or automatic. Try switching it back and forth until you find one that works best for you.


In conclusion, muffled sound from AirPods can be caused by earwax, dust, dirt, or any oher debris that gets stuck in the earpiece. The best way to prevent this is to make sure that the AirPods are kept clean. If they become too dirty, you can use rubbing alcohol on a cotton swab or pad to clean the speaker mesh and remove any dirt or wax that may have gotten stuck. Following these steps will ensure that your AirPods are producing crisp and clear audio without any muffling.

Share This:
Photo of author

Sanjeev Singh

Sanjeev is the tech editor at DeviceMAG. He has a keen interest in all things technology, and loves to write about the latest developments in the industry. He has a passion for quality-focused journalism and believes in using technology to make people's lives better. He has worked in the tech industry for over 15 years, and has written for some of the biggest tech blogs in the world. Sanjeev is also an avid photographer and loves spending time with his family.