How to Keep Your MacBook Pro 2017 Keyboard Clean and Shiny?

Share This:

Maintaining the cleanliness of your MacBook Pro 2017 keyboard is essential if you want to keep it in excellent condition. Not only will a clean keyboard look better, but it will also provide better performance and last longer. Fortunately, cleaning your MacBook Pro 2017 keyboard is a relatively simple task that can be done with a few simple tools and materials.

The first step to cleaning your MacBook Pro is to turn it off and unplug any connected devices. After unplugging the device, use compressed air to blow away any dust or debris from between the keys. Be sure to keep the nozzle of the compressed air at least 10 cm away from the keys so that you don't damage them.

Once you have blown away all visible dirt and debris, you can use a damp cloth to wipe down each individual key on the keyboard. Make sure that you use a lint-free cloth and avoid using any abrasive materials such as paper towels as these may scratch or otherwise damage your keyboard's surface finish. When wiping down each key, be sure that no liquid seeps into the crevices of the keys as this could cause permanent damage to your device.

Finally, you can use an alcohol-based cleaner or rubbing alcohol on a cotton swab or lint-free cloth to remove any stubborn dirt from between the keys or from other areas on your Macbook Pro 2017 keyboard's surface. Be sure not to apply too much pressure when wiping down with these materials as this could cause damage.

Cleaning your MacBook Pro 2017 keyboard doesn't need to be a difficult task – with just a few simple steps and materials, you can have your laptop looking like new in no time!

How to Keep Your MacBook Pro 2017 Keyboard Clean and Shiny? 1

Cleaning Under MacBook Pro Keys

To properly clean the area beneath your MacBook Pro keys, you'll need a few simple tools. First, power down your laptop and unplug it from any power source. Then, use a can of compressed air to blow away any dust or debris that has built up around and beneath the keys. You can also use a soft-bristled brush or an old toothbrush to gently sweep away any stubborn dirt that won't come off with the air. If you notice particles underneath the keys, use a cotton swab dampened with rubbing alcohol to carefully wipe them away. Finally, use a vacuum cleaner with a soft brush attachment to get rid of any remaining dirt or dust before putting everything back together. With these steps, you can keep your laptop looking and working like new!

Cleaning Sticky Keys on a MacBook Pro Keyboard

To clean the sticky keys on your MacBook Pro keyboard, start by turning off and unplugging your device. Then, use a damp cotton swab to gently remove any dirt and debris from between the keys. You can also use an electronic cleaning wipe to remove any surface dirt or grime. If you have a butterfly keyboard, don't pry the keys off—instead, use a thin flat tool to gently lift them up from the edge. Once you've finished cleaning each key, let them air dry for about five minutes before plugging your device back in and powering it on.

The Use of Alcohol Wipes to Clean a MacBook

Yes, you can use alcohol wipes to clean your MacBook. You should use 70 percent isopropyl alcohol wipes, 75 percent ethyl alcohol wipes, or Clorox Disinfecting Wipes to gently wipe the hard, non-porous surfaces of your MacBook, such as the display, keyboard, or other exterior surfaces. Do not use products that contain bleach or hydrogen peroxide as they may damage the finish of your computer.

Conclusion

The MacBook Pro 2017 keyboard is a popular device that requires regular cleaning to ensure its performance. It should be cleaned regularly with compressed air or a soft cloth to remove any dust or dirt. If the keys are sticky or difficult to press, the keys can be lightly wiped down with a damp cloth and then dried off with a dry cloth. Additionally, it is important to use only mild detergents or cleaners on the laptop's keyboard as harsh chemicals can damage it. Overall, regular maintenance of the MacBook Pro 2017 keyboard is essential for optimal performance and longevity of the device.

Share This:
Photo of author

James Walker

James Walker has a deep passion for technology and is our in-house enthusiastic editor. He graduated from the School of Journalism and Mass Communication, and loves to test the latest gadgets and play with older software (something we’re still trying to figure out about himself). Hailing from Iowa, United States, James loves cats and is an avid hiker in his free time.