How to Fix AirPods Pro Muffled Mic

Share This:

Are your AirPods Pro’s mic becoming muffled? Whether you’re using them in a noisy environment or just trying to take a call from home, muffled audio can quickly beome a major hassle. Fortunately, there are some steps you can take to help fix this issue.

First and foremost, make sure that your connection is working properly. If your audio is only muffled occasionally, it culd be that your Bluetooth or Apple W1 connection has become disrupted. If this is the case, try reconnecting or turning off and on both the AirPods and the device they’re connected to.

Another common cause of muffled audio is dirt or debris clogging up the microphone. To clean the AirPods microphone, use a soft cloth or cotton swab with either rubbing alcohol or water to remove any dirt buildup. Make sure not to get any liquid inside the microphone as this can cause further damage.

If these steps don’t work, you may need to update the AirPods firmware. This can usually be done by connecting your AirPods to an iPhone and going into Settings > General > About > AirPods (if available). You may also need to update the iOS version on your phone if it isn’t already current in order for this fix to take effect.

Lastly, if none of these solutions are successful, you may need to reset both your AirPods and iPhone by holding down ther respective power buttons for 10-15 seconds until you hear a sound indicating that they have been reset successfully. After that, try reconnecting them again and see if that solves the issue!

Hopefully one of these steps will help get you back up and running with clear audio from your AirPods Pro mic! If all else fails, contact Apple support for further assistance in resolving any remaining issues.

How to Fix AirPods Pro Muffled Mic 1

Improving AirPod Microphone Quality

The best way to fix an AirPods microphone quality issue is to start by putting the AirPods back in the case and reconnecting them. Then, you can try cleaning the microphones with a soft, dry cloth and checking the active microphone settings. If this doesn’t work, try updating the AirPods firmware, restarting your iPhone, updating your iPhone’s software, resetting your AirPods and then reconnecting them, or resetting your iPhone’s network settings. If none of these steps fix the issue, you should contact Apple Support for further assistance.

Troubleshooting Muffled AirPod Microphone Quality

The most likely cause of muffled microphone sounds with your AirPods is that the microphone is not properly connected to the device. This could be due to a loose connection between your AirPods and your device, or it could be due to a glitch or issue with eiter your Bluetooth connection or Apple W1 connection. To ensure the best sound quality, try resetting both connections and make sure they are properly paired with each other. Additionally, make sure that there isn’t any debris in the mic ports of your AirPods and that they are seated properly in your ears.

Investigating the Causes of Muffled Audio on AirPods

If your AirPods are muffled when you talk, the most likely cause is a build-up of dirt, dust, or earwax on the speaker grille. When this happens, it prevents the sound waves from moving through unimpeded, resulting in muffled audio. To fix this issue, use a dry cloth to gently wipe away any debris lodged in the speaker grille and make sure to keep your AirPods clean and free of dust. Additionally, if you’re having trouble hearing yourself talk when using your AirPods, try resetting them by holding down the setup button for at least 15 seconds.

Troubleshooting Poor Voice Clarity on AirPods Pro

There could be a few reasons why your AirPods Pro voice isn’t clear. It could be due to a software issue, such as an outdated version of the software on your connected device. It could also be due to wireless interference or obstructions betwen you and your device. Lastly, it could be caused by the app that you’re using; try listening to audio from a different app to see if the issue persists.

Cleaning the AirPods Pro Microphone

To clear your AirPods Pro mic, start by gently wiping the microphone and speaker meshes with a dry cotton swab. Then use a clean, dry, soft-bristled brush to remove any debris from the meshes. Be careful not to use sharp objects or abrasive materials, as this could damage your AirPods Pro. If you have any stubborn buildup of dirt or grime on your AirPods Pro mic, you can try using compressed air to blow it away. After cleaning your AirPods Pro mic, make sure to allow them to dry before using them again.

airpod pros mic muffled

Improving Sound Quality of AirPod Pros

The best way to make AirPod Pros less muffled is to reset the Bluetooth connection between your iPhone and AirPods. To do this, go to Settings > Bluetooth on your iPhone and tap the “i” icon next to your AirPods. Then tap “Forget This Device” and reconnect your AirPods to your iPhone. You can also reset either your AirPods or playback device by pressing and holding the button on the back of the charging case for a few seconds util you see the LED light start flashing. Additionally, make sure that when you connect your AirPods to your iPhone, it automatically uses them as its microphone source by going into Settings > Bluetooth and tapping on your AirPods in the list of connected devices. From there, enable the option for “Use with Siri” or “Use as Default Microphone” so that audio from calls or recordings will use the AirPod microphones instead of the ones built into your device.

Improving Clarity of Voice Through AirPods

To make your AirPods voice clear, go to Settings > Accessibility > Audio/Visual. Make sure that both Headphone Accommodations and Transparency Mode are turned on. Then select Custom Transparency Mode and turn on Ambient Noise Reduction. This will help to reduce background noise and improve the clarity of your AirPods’ audio. You may need to adjust the settings or experiment with diffeent combinations to find an optimal sound for your environment.


In conclusion, AirPods Pro Mic Muffled is a common issue and can be caused by several factors, including a poor Bluetooth connection, dirt or gunk clogging up the earpiece, or worn out audio components. Fortunately, thee are ways to fix this issue. You can check your Bluetooth connection, clean your AirPods microphones, check active microphone settings, update the AirPods firmware, restart or update your iPhone, reset and reconnect your AirPods or reset your iPhone’s network settings. By following these steps you should be able to get your AirPods Pro Mic back in working order and enjoy clear audio quality once again.

Share This:
Photo of author

Sanjeev Singh

Sanjeev is the tech editor at DeviceMAG. He has a keen interest in all things technology, and loves to write about the latest developments in the industry. He has a passion for quality-focused journalism and believes in using technology to make people's lives better. He has worked in the tech industry for over 15 years, and has written for some of the biggest tech blogs in the world. Sanjeev is also an avid photographer and loves spending time with his family.