How to Reset Your UE Megaboom Speaker?

Share This:

If you’re having trouble with your UE Megaboom portable speaker, resetting it may be the solution. Resetting your Megaboom can help fix a variety of issues, from connectivity problems to sound quality issues. Here’s how to reset your UE Megaboom:

1. Turn on your Megaboom speaker.

2. Locate the volume down button and the power button on your speaker.

3. Press and hold down both buttons simultaneously for about 10 seconds until you hear a sound.

4. Your Megaboom will then turn off.

5. Turn it back on and try to pair it with your device again.

6. If you’re using two Megaboom speakers in Double Up mode, try disconnecting and streaming to one speaker only.

Resetting your Megaboom can also help if you’re having issues with the battery life. If you’re experiencing a shorter-than-usual battery life, try resetting your Megaboom and see if that helps.

It’s important to note that resetting your Megaboom will erase any settings or customizations you’ve made to your speaker. So, if you’ve changed the language, EQ settings, or any other customization, you’ll need to set them up again after resetting your speaker.

Resetting your UE Megaboom can be a helpful solution to a variety of issues you may be experiencing with your portable speaker. By following the steps outlined above, you can reset your Megaboom and get back to enjoying your music.

How to Reset Your UE Megaboom Speaker? 1

Troubleshooting UE Megaboom Not Turning On

If your UE Megaboom speaker is not turning on, there are a few things that you can try to fix the issue. Here are some steps you can follow:

1. Check the battery: The first thing you should do is check the battery level of your speaker. If the battery is completely drained, the speaker will not turn on. Connect the speaker to a power source and let it charge for a few hours.

2. Reset the speaker: If the battery is not the issue, you can try resetting the speaker. To do this, press and hold down the power button for about 15-20 seconds until you hear a sound. Then release the button and try turning on the speaker again.

3. Remove the app: If you have installed the UE Megaboom app on your smartphone, try removing it and then turning on the speaker. Sometimes, the app can cause conflicts with the speaker and prevent it from turning on.

4. Update the firmware: Check if there is a firmware update available for your speaker. If there is, download and install it. Firmware updates can fix bugs and improve the performance of your speaker.

5. Contact support: If none of the above steps work, contact the UE Megaboom support team for further assistance. They may be able to provide additional troubleshooting steps or offer a repair or replacement if the speaker is still under warranty.

megaboom reset

Resetting an Ultimate Boom

To reset your Ultimate Ears (UE) Boom, follow the steps below:

1. Turn on your UE Boom.

2. Hold down the volume down button and the power button at the same time until you hear a sound.

3. Your UE Boom will then turn off.

4. Turn it back on and try to pair it with your device again.

By following these steps, you should be able to reset your UE Boom and start using it again. It is important to note that resetting your UE Boom will erase any previously stored pairing information, so you will need to re-pair it with your device. If you have any further issues with your UE Boom, you may need to contact customer support for additional assistance.

Troubleshooting Megaboom Connection Issues

There could be several reasons why your MEGABOOM speaker is not connecting. It could be due to a connectivity issue with the audio source, a low battery on the speaker, or a problem with the Bluetooth pairing. To troubleshoot the issue, try the following steps:

1. Restart both your speaker and the audio source: Turning off both devices and then turning them back on can help to reset the connection and resolve any issues.

2. Re-pair your device with your speaker: If the speaker has been previously paired with your audio source, try removing the device from the speaker’s Bluetooth settings and then re-pairing them.

3. Check the battery level: If the speaker’s battery is low, it may not be able to connect to your audio source. Try charging the speaker and then attempting to connect again.

4. Disconnect any other paired devices: If you have multiple devices paired with your speaker, try disconnecting them and then attempting to connect with the desired device.

5. Check for interference: Bluetooth signals can be disrupted by other electronic devices and obstacles such as walls. Try moving your audio source closer to the speaker or moving the speaker to a different location to reduce interference.

By following these steps, you should be able to troubleshoot and resolve any issues with connecting your MEGABOOM speaker.


Resetting your UE Megaboom speaker can be a simple solution to various issues you may encounter, such as connectivity problems, unresponsiveness, or general malfunctions. By following the steps provided, you can easily perform a factory reset on your device, which will restore it to its original settings and potentially resolve any issues. Remember to hold down both the volume down button and the power button for several seconds until you hear a sound, and then turn your speaker back on and attempt to pair it with your device again. With these simple steps, you can get your UE Megaboom speaker back up and running in no time.

Share This:
Photo of author

James Walker

James Walker has a deep passion for technology and is our in-house enthusiastic editor. He graduated from the School of Journalism and Mass Communication, and loves to test the latest gadgets and play with older software (something we’re still trying to figure out about himself). Hailing from Iowa, United States, James loves cats and is an avid hiker in his free time.