How To Get Broken Charger Out Of Iphone

If you find yourself with a broken charger stuck in your iPhone, don’t panic. There are a few simple steps you can take to safely remove it and get your charging port back in working order.

The first thing you can try is to gently loosen any debris, such as sand or dust, that may be causing the charger to get stuck. You can use a toothpick or a small, thin object to carefully dislodge any foreign objects from the charging port. Be sure to do this gently to avoid causing any damage to the port itself.

If that doesn’t do the trick, your next option is to use compressed air. An air compressor is your best bet for effectively removing sand, dust, or other hard-to-see debris from the charging port. Simply aim the compressed air directly into the port and give it a few short bursts. This should help to dislodge any stubborn debris that may be causing the charger to get stuck.

If you don’t have access to an air compressor, you can also try using a can of compressed air specifically designed for electronics. These cans can be found at most electronics or computer stores. Just be sure to follow the instructions on the can and use short bursts of air to avoid causing any damage to your iPhone.

If all else fails and you’re still unable to remove the broken charger from your iPhone, it may be time to seek professional help. Local repair shops often have the tools and expertise to safely remove broken chargers and repair any damage that may have occurred.

Keep in mind that the cost for iPhone charging port replacement can vary depending on your model and location. Local shops can often complete the repair in about an hour, either in-store or at your location. Apple’s repair fees tend to be on the higher end, so it’s worth shopping around to find the best option for you.

A broken charger in your iPhone’s charging port can be frustrating, but with a few simple steps, you can safely remove it and get your charging port back in working order. Whether it’s gently loosening debris, using compressed air, or seeking professional help, there are options available to get your iPhone charging again.

How Do I Remove Things From My IPhone Charging Port?

To remove debris from your iPhone charging port, follow these steps:

1. Gather the necessary tools: You will need a toothpick and an air compressor. Make sure the air compressor is set to a low pressure setting to avoid causing any damage.

2. Power off your iPhone: Before attempting any cleaning, it is important to turn off your iPhone to prevent any potential damage.

3. Inspect the charging port: Take a close look at the charging port to identify any visible debris such as sand or dust.

4. Loosen the debris: Gently insert the toothpick into the charging port and carefully loosen any visible debris. Be extremely cautious not to apply too much pressure or damage the port.

5. Use compressed air: Once you have loosened the debris, it’s time to use an air compressor. Direct the nozzle of the air compressor into the charging port and release short bursts of air to blow away any remaining debris. Keep the air compressor at a safe distance from the port to avoid causing damage.

6. Repeat if necessary: If you still notice debris in the charging port, repeat the process of using the toothpick and compressed air until the port appears clean.

7. Test the charging port: After cleaning, power on your iPhone and check if the charging port is working properly. If it still doesn’t work, there may be another issue that requires professional assistance.

Remember to always be gentle and cautious when cleaning your iPhone charging port to avoid causing any damage.

how to get broken charger out of iphone

How Do You Get A Stuck Charging Cable Out Of The Charging Port?

To get a stuck charging cable out of the charging port, you can try the following steps:

1. Lock and unlock the car: Use the key fob to lock and then unlock the car. Sometimes, this simple action can release the cable immediately, as it might just be a glitch.

2. Press and pull: If the cable remains stuck after locking and unlocking the car, try pressing it further into the port and then pulling it out. Applying some pressure can sometimes help release the cable from the socket.

If these steps don’t work, it’s important to exercise caution and avoid using excessive force, as it could potentially damage the charging port or the cable itself. In such cases, it is advisable to consult a professional or contact the manufacturer for further assistance.

How Do You Remove A Broken Charger From An Outlet?

To safely remove a broken charger from an outlet, follow these steps:

1. Turn off the circuit breaker: Locate the circuit breaker panel in your home and switch off the breaker that controls the outlet you need to work on. This will ensure that there is no electrical current flowing through the outlet and minimize the risk of electric shock.

2. Test the outlet: Once you have turned off the circuit breaker, use a voltage tester or a multimeter to confirm that there is no power running to the outlet. This step is crucial for your safety.

3. Gather the necessary tools: You will need a pair of pliers to grip the broken prong securely. Make sure the pliers are clean and in good working condition.

4. Grab the broken prong: With the pliers, carefully grip the side of the broken prong that is flat and rounded. Apply gentle pressure to ensure a firm grip.

5. Remove the broken prong: Slowly and steadily, pull the broken prong out of the outlet. Be cautious not to exert excessive force that could damage the outlet or cause injury.

6. Dispose of the broken prong: Once you have successfully removed the broken prong, dispose of it properly. Wrap it in electrical tape or place it in a small bag to prevent any accidental contact.

Remember, safety should be your top priority when dealing with electrical outlets. If you are unsure or uncomfortable with performing these steps yourself, it is always advisable to seek assistance from a professional electrician.

Can You Fix A Broken Charging Port On An IPhone?

A broken charging port on an iPhone can be fixed. There are several options available for repairing a broken charging port on an iPhone, including:

1. Local repair shops: Many local shops specialize in repairing smartphones, including iPhone charging ports. These shops often have the necessary tools and expertise to replace a broken charging port. The repair can typically be completed in about an hour, either in-store or at your location.

2. Apple Store: If you prefer to have your iPhone repaired by Apple, you can visit an Apple Store or authorized service provider. They have certified technicians who can diagnose and repair the charging port issue. However, it’s important to note that Apple’s repair fees tend to be on the higher end compared to other repair options.

The cost of iPhone charging port replacement can vary depending on your iPhone model and location. On average, the cost ranges from $79 to $159 for the repair. It’s always best to contact the repair shop or Apple directly to get an accurate estimate for your specific situation.

If you have a broken charging port on your iPhone, it is fixable. Whether you choose a local repair shop or an Apple Store, they have the expertise to replace the charging port and get your iPhone back in working condition.

Conclusion

A broken charger can be a frustrating issue to deal with, but there are several solutions available. If your charger is not working due to debris in the charging port, using an air compressor or a toothpick to remove any sand or dust can be effective. If the charging port is still not working, gently pressing the charger further into the port and then pulling it out may help release any obstructions. However, it is important to exercise caution and ensure the circuit breaker is turned off before attempting any repairs. If these DIY methods do not work, it is recommended to seek professional help from a local repair shop. The cost for iPhone charging port replacement can vary depending on the model and location, with Apple’s repair fees generally being on the higher end.

Photo of author

Sanjeev Singh

Sanjeev is the tech editor at DeviceMAG. He has a keen interest in all things technology, and loves to write about the latest developments in the industry. He has a passion for quality-focused journalism and believes in using technology to make people's lives better. He has worked in the tech industry for over 15 years, and has written for some of the biggest tech blogs in the world. Sanjeev is also an avid photographer and loves spending time with his family.

This article may contain affiliate links (disclosure policy).