How to Solve Water Damage in iPhone Speakers?

Share This:

The iPhone is a popular and beloved device that many people depend on for various tasks throughout the day. However, accidents happen, and one common issue that iPhone users may encounter is water damage. If your iPhone gets wet, one of the potential consequences could be a muffled speaker. In this article, we will explore why water can affect the iPhone speaker and what you can do to resolve this issue.

When water comes into contact with the iPhone’s speaker, it can seep into the device and disrupt its normal functioning. Water can obstruct the sound waves produced by the speaker, leading to a muffled or distorted sound. This can be an inconvenience, especially if you frequently use your iPhone to listen to music or make phone calls.

If you suspect that your iPhone’s speaker has been affected by water, it is essential to act quickly to prevent any further damage. Here are some steps you can take to address this issue:

1. Check for water: Place your iPhone, speaker side down, on a lint-free cloth and see if any water drips out. Water in the speaker port can hinder the speaker’s performance until it completely evaporates. If you see small water droplets exiting the speaker grilles or the front speaker near the earpiece, this confirms that water has entered the speaker.

2. Dry the iPhone: The first step is to dry your iPhone thoroughly. Start by wiping off any visible water with a lint-free cloth. Avoid using paper towels or tissues, as they can leave behind residue or fibers. You can also gently shake the iPhone to remove excess water, but be careful not to drop it or cause further damage.

3. Remove water from the speaker: To expedite the drying process, you can use compressed air or a vacuum cleaner on a low setting to remove any remaining water from the speaker. Ensure that you hold the device securely and do not place the nozzle too close to the speaker to prevent any damage.

4. Allow time for drying: After removing as much water as possible, it is crucial to give your iPhone enough time to dry completely. Leave it in a cool and dry place, preferably near a fan or in a room with low humidity. It is essential to exercise patience during this step to allow the internal components to dry thoroughly.

5. Test the speaker: Once you believe that your iPhone has had sufficient time to dry, test the speaker to see if the muffled sound issue has been resolved. Play some music or make a phone call to check if the sound quality has returned to normal. If the speaker still sounds muffled, you may need to repeat the drying process or seek professional assistance.

Water damage can cause the iPhone speaker to sound muffled or distorted. By following the steps outlined above, you can effectively address this issue and restore your iPhone’s speaker to its normal functionality. Remember to act quickly, dry your device thoroughly, and exercise patience during the drying process. If the problem persists, it is advisable to consult an authorized service center for further assistance.

What Should You Do If Your iPhone Got Wet And Now Its Speaker Sounds Muffled?

If your iPhone has gotten wet and the speaker sounds muffled, there are a few steps you can take to potentially resolve the issue:

1. First, check to see if there is any visible water in the microphone or speaker area. Place your iPhone, speaker side down, on a lint-free cloth and observe if any water drips out. If you can see water, it is important to let it completely evaporate before using your iPhone again. Water in the port can degrade speaker or microphone performance until it fully evaporates.

2. Avoid using your iPhone while it is still wet, as this can further damage the internal components. Turn off your iPhone and do not attempt to charge it until it has dried completely.

3. To aid in drying your iPhone, you can try using a desiccant, such as silica gel packets or uncooked rice. Place your iPhone in a sealed container or bag with the desiccant and let it sit for at least 24-48 hours. The desiccant will help absorb moisture from the device.

4. Do not use a hairdryer, microwave, or any other heat source to dry your iPhone. High temperatures can cause damage to the internal components.

5. After allowing your iPhone to dry completely, you can try turning it on and checking if the speaker issue persists. If the problem remains, you may need to visit an authorized service center or contact Apple support for further assistance.

Remember, water damage can be unpredictable and may cause long-term issues with your iPhone. It is always advisable to have your device checked by professionals if you are uncertain about its functionality after getting wet.

water in iphone speaker muffled

Will Water Eventually Come Out Of iPhone Speaker?

Water can indeed come out of the iPhone speaker if it has been submerged or exposed to a significant amount of water. However, the amount and visibility of the water will depend on various factors such as the volume of water that entered the device and the internal design of the speaker system.

Here’s a breakdown of what you can expect:

1. Water droplets: If there is a substantial amount of water in your iPhone, you may notice small water droplets exiting the speaker grilles. These droplets can be visible and may vary in size depending on the amount of water present.

2. Front speaker: In some cases, you might also observe water coming out of the front speaker located near the earpiece. This is because the water can travel through the internal components and make its way to the front speaker.

3. Visibility: It’s important to note that the visibility of water exiting the speaker grilles might not always be apparent. Sometimes, the water evaporates quickly or gets absorbed by internal components, making it difficult to observe. However, even if you can’t see the water, your iPhone should sound normal again almost immediately.

In any case, it is crucial to address water damage promptly by following proper drying techniques or seeking professional assistance to prevent further damage to your device.


If your iPhone speaker sounds muffled after being exposed to water, it is important to check for any water that may have entered the microphone or speaker port. This can be done by placing your iPhone, speaker side down, on a lint-free cloth and observing if any water droplets drip out. The presence of water in these ports can impact the performance of the speaker or microphone until it completely evaporates.

If you do notice water droplets exiting the speaker grilles or the front speaker near the earpiece, this is a good indication that water has entered the device. However, even if you cannot see the water making its exit, the speaker should sound normal again almost immediately as the water evaporates.

It is crucial to allow the water to fully evaporate before using your iPhone again, as using the speaker or microphone while water is still present can potentially cause damage. By giving it some time to dry out, you can ensure that the speaker returns to its normal functionality.

If you have followed these steps and the speaker continues to sound muffled or distorted, it is advisable to seek professional assistance or contact Apple support for further guidance.

Share This:
Photo of author

Sanjeev Singh

Sanjeev is the tech editor at DeviceMAG. He has a keen interest in all things technology, and loves to write about the latest developments in the industry. He has a passion for quality-focused journalism and believes in using technology to make people's lives better. He has worked in the tech industry for over 15 years, and has written for some of the biggest tech blogs in the world. Sanjeev is also an avid photographer and loves spending time with his family.