How to Eject Water from Your iPhone Speaker

Share This:

Water eject sound is a vital tool that can help keep your phone safe and dry. It’s a low-frequency sound emitted from your phone that helps to remove any water that may have entered into its speaker grill. This sound is usually activated through a Siri shortcut, although you can also create your own with the right app or software.

The frequency of the sound produced by water ejection is 165Hz. This frequency has been proven to be effective in pushing out water that has been trapped inside the speaker. When this sound is activated, it vibrates at an extremely low level, creating pressure waves that force any trapped water out of the speaker grill and away from your device.

Using an appropriate water eject sound can be a great way to protect your phone from potential water damage. It’s important to remember that playing music or other sounds will not produce the same result as a specifically designed water eject sound. The frequency used must be precise in order to ensure that all trapped moisture is removed efficiently and effectively.

It’s also important to note that the iPhone’s speaker cleaner feature does not work for all devices; some phones may require other methods of extracting trapped water from their speakers. If this is the case for your device, then you may want to consider downloading a dedicated app or software that can play an appropriate 165 Hz frequency.

Overall, using a water eject sound is an effective way of protecting your phone from potential damage caused by trapped moisture in its speaker grill. Remember to use only specifically designed frequencies for maximum effectiveness and always consult manufacturer guidelines before attempting any extraction method on your device!

How to Eject Water from Your iPhone Speaker 1

Does the iPhone Have a Water Ejection Feature?

Yes, iPhone has a Water Eject Siri shortcut that allows users to quickly and easily remove water from their device’s speaker grill. This feature is useful for those times when your phone has been exposed to water, whether it’s from an accidental drop in the pool or taking it into the shower. All iPhones are designed to be water-resistant, so using the Water Eject shortcut is an effective way to quickly get rid of any water that may have entered the speaker grill.

The Effects of Water on Speakers

Yes, leaving any type of fluid in your speaker can cause serious damage when it dries out. Water and other liquids can corrode or erode important components inside the speaker, such as wiring, drivers, and amplifiers. This can cause permanent damage to the speaker’s sound quality and performance. Additionally, the moisture from water can also lead to mold growth, which can further damage the speaker components. Therefore, it is best to avoid getting any type of liquid inside your speakers.

How to Eject Water from an iPhone

Eject Water iPhone is a shortcut available on iPhones that helps to push out any water that has become trapped in the speakers of the device. It works by playing an ultrasonic sound at a frequency of 165Hz which vibrates and moves the water away from the speaker. This can be extremely helpful if your iPhone has been exposed to water and you want to avoid any damage to the device.

Starting Water Ejection

To start water ejection, open the Shortcuts app on your iPhone and tap ‘My Shortcuts’. Inside this tab, you should see a shortcut called ‘Water Eject’. Tap this shortcut to begin the water ejection process. You will then receive a notification – tap ‘Begin Water Ejection’ to start the process.

The Fastest Way to Remove Water from a Phone

The fastest way to get water out of your phone is to turn it off and remove any wet components, including the battery. Fill a sealable bag, dish, or container with dry, uncooked rice. Carefully place your device and any wet components inside the rice. Do not move the phone around too much or turn it upside down. Allow the device to sit in the rice for at least 24 hours before turning it back on to check if it is working properly.

Removing Water from a Phone

The best way to remove water from a phone is to act quickly. First, remove the phone from the liquid right away and turn it off. To prevent further damage, remove the protective case and open up the back panel of the phone if possible. Then, take out the battery, SIM card, and microSD card (if you have one). Next, use a cloth or paper towel to dab your phone dry. If possible, leave your phone in a warm environment with plenty of air circulation to help evaporate any remaining moisture. Finally, once your phone is dry, reassemble it and turn it on to check for any signs of damage.

Drying Out Water From a Phone

To dry out water from a phone, the best way is to put it in an airtight container filled with silica gel packets or another drying agent. Silica gel is a desiccant, meaning it absorbs moisture. It is important to make sure the container is airtight so that the moisture can be absorbed and not just trapped in the same space as your phone. Place the phone in the container and let it sit for several hours or overnight. Silica gel will take up any excess moisture, leaving your phone dry and safe!

The Length of Time Required to Eject Water from an iPhone

It takes approximately 15 seconds to eject water from an iPhone using the Water Eject shortcut. During this time, a tone will sound to indicate that the process is in progress. Once the tone has stopped, the water should have been successfully ejected from your device.


In conclusion, the Water Eject feature on iPhones is a great way to quickly and easily remove any water trapped in your device’s speaker grill. The 165Hz-frequency sound that plays when the shortcut is activated helps push out any water that may have made its way inside. This is an effective and convenient way to keep your phone safe from water damage, as opposed to playing a random song from your library which will not produce the same effect. Therefore, if you ever find yourself with a wet phone, don’t hesitate to take advantage of this useful feature.

Share This:
Photo of author

Sanjeev Singh

Sanjeev is the tech editor at DeviceMAG. He has a keen interest in all things technology, and loves to write about the latest developments in the industry. He has a passion for quality-focused journalism and believes in using technology to make people's lives better. He has worked in the tech industry for over 15 years, and has written for some of the biggest tech blogs in the world. Sanjeev is also an avid photographer and loves spending time with his family.